0Inquiry

20L Single Post Nordson Pneumatic Pump XD3

PN: 5S-XD3

For Efficient Dispensing of High Viscosity Ambient Temperature Adhesives and Sealants.
Suitable for sealant, adhesive, acrylic, silicone, RTV, epoxy, urethane applications and more.

  • Air motors and multiple follower plates are interchangeable to allow simple system configuration
  • Unique plunger seal design to eliminate risk of costly material waste / loss due to leakage or pressure loss
  • Simple and intuitive pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.

XD version provides components with ScoreGuardTM Coating:
Hard surface resists scratching and pitting
Optimizes friction coefficient to prolong seal packing life
Lowers frequency of service, and total cost of ownership

Suitable pail sizes:
Straight 280, 286, 305, 310mm
Tapered 280 – 286mm
Max pail height 18″ (147mm)
Ratio Material pressure range
6:1 240 – 450 psi / 16.5 – 31 bar
10:1 400 – 750 psi / 27.5 – 51.5 bar
15:1 600 – 1100 psi / 41 – 75.5 bar
25:1 1000 – 2000 / 69 –137.5 bar

 

Add to inquiry

Technical specifications

Volume per Cycle 190 cc / 6.42 fl oz.
Maximum Output 2.85 L/min. / 0.75 gal/min.
Maximum Cycle Rate Intermittent:1 cycle per 4 sec.

Continuous: 1 cycle per 8 sec.

Dynamic Viscosity Range 30,000 - 4,000,000cps
Wetted material Carbon steel
Dimensions
W / H / D 58 cm / 201 cm /48 cm

 

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information