Česky (EUR)
Deutsch (EUR)
Polski (EUR)
български език (EUR)725HF-SS HIGH FLOW PISTON VALVE
Product code: 7021020
Precision packaging and filling valve systems 725hf
725HF high-flow valve systems dispense low-to-high viscosity fluids at rates up to 450 ml/s.
• Best for filling small vials, foil packs, and samples of lotions or perfumes.
• Suitable for adhesives, solder pastes, and electronics potting applications.
• Features positive shut-off with a slight snuff-back for precise fill amounts.
• Unique UHMW polymer diaphragm replaces typical seals and seal maintenance.
• Ensures fluid separation integrity from the actuator cylinder body. More
725HF high-flow valve systems dispense low-to-high viscosity fluids at rates up to 450 ml/s.
• Best for filling small vials, foil packs, and samples of lotions or perfumes.
• Suitable for adhesives, solder pastes, and electronics potting applications.
• Features positive shut-off with a slight snuff-back for precise fill amounts.
• Unique UHMW polymer diaphragm replaces typical seals and seal maintenance.
• Ensures fluid separation integrity from the actuator cylinder body. More
Parameters
| 1K/2K | Single Component |
|---|---|
| Type | Piston |
| Series | 725 |
| Wetted material | Stainles Steel 303 |
Features and benefits
- FDA-compliant wetted parts and autoclavable at 121 °C (250 °F).
- High dispensing precision with refill tolerance < ±1%.
- Fully adjustable flow rate and positive drip-free shutoff.
- Cycle rate exceeds 400/min with a low-maintenance design.
Technical specifications
| Parameter | Value |
| Maximum Fluid Pressure | 6.9 bar (100 psi) |
| Weight | 309 g (10.9 oz) |
| Fluid Body Material | Type 303 Stainless Steel |
| Seal Head / Diaphragm | UHMW Polymer (FDA compliant) |
| Actuating Air Pressure | 4.8 bar (70 psi) |
| Repeat Tolerance | < ±1% |
| Cycle Rate | Exceeds 400 cycles/min |
Documents and 3D models
Maintenance guide
(pdf, 1.5 MB)
Installation guide
(pdf, 438.4 kB)
Data sheet
(pdf, 234.1 kB)
3D model
(zip, 1.1 MB)
