Česky (EUR)
Deutsch (EUR)
Polski (EUR)
български език (EUR)CONTROLLER 7100, DISPENSE VALVE
Deposit size is determined by a combination of fluid pressure, valve stroke, tip size and valve open time, with valve open time providing the greatest control over the amount of fluiddispensed.The EFD ValveMate 7100 controller is a fast, convenient way to adjust valve open time in increments as small as 0.001 seconds, right at the dispensing station. The result is exceptional process control without time-consuming programming or mechanical adjustments that require the production line to be shut down. More
Features and Benefits
• Maximum process control
• “On the fly” deposit adjustment
• Intuitive, easy operator interface
• Cost-effective
• Simple to set up and operate
• Easily interfaced with a PLC
• Digital air output display (psi/bar)
• Fast response pneumatic solenoid
Specifications
Cabinet Size: 14.0 cm x 14.2 cm x 6.8 cm (5.5" W x 5.6" D x 2.7" H)
Weight: 1.18 kg (2lbs 9oz)
Electrical Power Input: 24VDC (+/- 5%), 0.63A maximum
Electrical Input Connector: Switchcraft L722RA or equivalent, locking type
External Power Adapter: 100-240 VAC (+/-10%),~ 50/60 Hz input, 24VDC (+/- 5%), 0.63 A output,
Switchcraft S761K locking DC plug or equivalent, wall mount, changeable AC plugs.
Feedback Circuits: EOC Out & Alarm Out: Electronic switch, 24VDC, 100mA maximum.
Initiate Circuits: 5-24 INIT: 5-24VDC initiate signal.
CC INIT & Foot Switch: Dry contact initiate circuits, 19mA, closure current.
INIT signal duration: No less than 0.012 sec. momentary or maintained for steady.
Cycle Rate: Exceeds 600 per minute
Time Range: Programmable 0.001 to 99.9 seconds
Product Classification: Installation Category II
Pollution Degree 2