PN: 7825168

Easy-to-use interface for precise Liquidyn P-Jet and Liquidyn P-Dot Series valve control

The Liquidyn®V200 controller provides an easy-to-use interface for controlling the Liquidyn P-Jet and Liquidyn P-Dot Series high performance micro-dispensing valves,allowing operators to quickly determine the best baseline settings for optimal dispensing results. Controls for peripheral devices, such as air pressure regulators anda heater, are already integrated.
All programming functions are accessed through theintuitive push-button control panel, and uid and operating pressure adjustments can be made at the controller using the dedicated adjustment knobs. Actual pressure and temperature readings are displayed on the control panel.
The Liquidyn V200 Controller also accepts inputs for remote control and outputs for monitoring. Single or continuous deposits can be initiated remotely, as well as dispense cycle start and stop. The controller ready status and the status of the temperature control (temperature setpoint achieved or not achieved) can also be determined remotely.
Because of its easy-to-use controls and multi-functional capabilities, the Liquidyn V200 controller is ideal for use in trials and process development in laboratories or at manual work stations.

•Programmable dispensing parameters – up to four programs
•Continuous shot operation up to 100Hz (P-JetSolderPlus), 150Hz (P-Dot) and 280Hz (P-Jet)
•Continuous display of actual pressure and temperaturereadings
•Setpoint Counter sets the number of shots and shows theactual number of shots deposited
•PID heater control with digital display
•Two precision pressure regulators with digital display
•External trigger input via potential-free operation
•Digital display in English and German

•High repeatability and high accuracy provide veryconsistent dispensing results for higher productivity.
•All programming functions and air pressure adjustmentseasily accessed on the front of the controller.
•Remote operation and monitoring functions facilitate integration with existing systems or programmable logic controllers (PLCs)

Add to inquiry


Cabinet size: W 45 cm x H 12.5 cm x D 25 cm (17.2 x 4.92 x 9.84 in inches“)

Weight: 5.5 kg (12.1 lb)

Cycle Rate: Up to 280 Hz

Time Range: 2-9999 ms

Electrical Power Input: 24 VDC, 2.5 Amp minimum

Electrical Input Connector: Lumberg KFV70

Electrical Power Adapter: AC/DC power supply and power cord: 100–240 VAC, 50/60Hz,1.4 Amp input; 24 VDC, 2.5 Amp, 60 W maximum output

Feedback Circuit: 0 VDC (logical low), 24 VDC (logical high)

Input Air Pressure: 6.2–10.3 bar (90–150 psi)

Temperature Control: 0–90° C (32–194° F)

Approvals: CE, TUV, RoHS, WEEE, China RoHS

Warranty: 1 year, limited

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information