0Inquiry

Liquidyn P-Dot CT Actuator

PN: 7825002

High-precision micro-dispensing: reliable, fast and user-friendly

The Liquidyn®P-Dot is a high performance jet valve designed for the non-contact micro-dispensing of medium- to high-viscosity fluids, including oils, greases,adhesives, silicones, lacquers, fluxes, and medical and chemical substances. Depending on the material, the valve can dispense dot diameters ranging in size from0.3 to 5 mm. The distance between the valve and the substrate is usually between 2 and 10 mm.
The Liquidyn P-Dot valve’s fluid-carrying componentsare separate from the actuator, allowing them to be quickly and easily exchanged. This modular design makes fluid-type changeout and component replacement fast and easy.
Electro-pneumatically operated by a low voltage pulse signal, the valve can be operated using either a Liquidyn valve controller or a customer-supplied high-level controller, such as a PLC. The valve switches below 1 ms and automatically closes after each trigger signal. The valve is closed when idle (NC: normally closed).
Even the most demanding or delicate processes— whether due to product complexity or positional tolerances — are easy to implement with Liquidyn P-Dot valve non-contact dispensing.

Features
•Suitable for highly viscous fluids
•Dispensing volume starting at 3 nL
•Dispensing frequencies as high as 150Hz
•Bead or line dispensing capability
•Low voltage operation (24 VDC)
•Modular design
•3D dispensing

Benefits
•High repeatability and high accuracy provide veryconsistent dispensing results for higher productivity.
•Interchangeable components mean quick changeoutof fluid types and easy service and maintenance.
•IP65-compliant construction makes the valve dust-proof and wash-down friendly.

Add to inquiry

Specifications

Size: 38.6Wx 126.7Hx 61Lmm (1.5Wx 5Hx 2.4L")
Weight: 270.0 g (9.5 oz)
Maximum fluid pressure: 100 bar (1,450 psi)
Fluid inlet: M8 x 1, flat sealing
Mounting: M3 x 25
Maximum operating frequency: 150 Hz
Pulse time: 2 ms
Input voltage: 24 VDC, PLC compatible
Power consumption: 0.5 Amp (peak 5.0 Amp)
Input air pressure: 2.0-5.0 bar (29-73 psi)
Maximum valve temperature: 40° C (104° F)
NOTE: Refer also to the manufacturer’s safety data sheet (SDS) for the material to be dispensed for the required ambient operating conditions

Maximum nozzle heater temperature: 90° C (194° F)
Fluid body: 303 stainless steel
Heater body: Aluminum
Humidity: 10-80%
Storage temperature: -5–40° C (23–104° F)
Dispensing volume: 3–200 nL (1–6.8 oz) per cycle
Viscosity range: 50–200,000 mPas (thixotropic)
Dispensing accuracy: >99% (dispensing tolerance <1%)
Service life: >100,000,000 cycles
Product classification: IP65
Installation category II

Compressed air quality class: Pollution degree DIN ISO 8573-1, class 5
Approvals: CE, TUV

7825002_Liquidyn_P-Dot_Valve_Drawing

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information