PN: FTTR-1418S

Reducing Adapter 1/4 NPT Female to 1/8 NPT Male

Tube OD 1/4″
E (NPT) 1/8″
A 32.0 mm
H 19.1 mm
Material Stainless Steel  316

Add to inquiry


Turning the nut to the finger tight position is the only requirement before starting the installation.
Fittings should not be disassembled before installation to maintain cleanliness and prevent unwanted foreign material from entering the system.
Care in the proper selection of tubing also contributes to a safe and reliable installation.


Step 1
Insert the tubing into the SUPERLOK Tube Fitting making sure the
tubing is bottomed out and is in complete contactwith the shoulder of the fitting. Also, the nut should be inthe finger-tight position at this time.
Step 2
Before tightening, mark the SUPERLOK nut at the 6 o’clock position.
Step 3
Hold the fitting body safely with a back-up wrench and tighten the nut 1-1/4 turns until your mark reaches the
9 o’clock position.

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information