1Inquiry

REDUCING HEX BUSHING 1/2″ NPTM x 1/4″ NPTF

PN: FTTR-12N14NS

Reducing Hex Bushing 1/4 NPT Female to 1/2 NPT Male

Male Pipe Size 1/2″ G
E – Female Pipe Size 1/4″ NPT
A 27.4 mm
H 22.2 mm
Material Stainless Steel  316

FTTR-12G14NS-Drawing

Add to inquiry

Turning the nut to the finger tight position is the only requirement before starting the installation.
Fittings should not be disassembled before installation to maintain cleanliness and prevent unwanted foreign material from entering the system.
Care in the proper selection of tubing also contributes to a safe and reliable installation.

FSN316_Drawing2

Step 1
Insert the tubing into the SUPERLOK Tube Fitting making sure the
tubing is bottomed out and is in complete contactwith the shoulder of the fitting. Also, the nut should be inthe finger-tight position at this time.
Step 2
Before tightening, mark the SUPERLOK nut at the 6 o’clock position.
Step 3
Hold the fitting body safely with a back-up wrench and tighten the nut 1-1/4 turns until your mark reaches the
9 o’clock position.

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information