NO-DRIP VALVE AL POLY
NO-DRIP VALVE AL POLY
Dual ball and seat, piston actuated material valve
Designed for low-viscosity, pourable materials, abrasive or filled materials and high flow applications
Aluminum model with polymyte seals (for abrasive materials), 2 Port Nose (for similar viscosity and ratios < 5:1 vol.)
|
1K/2K
|
Two Component |
|---|---|
|
Type
|
Piston |
|
Wetted parts
|
Polymyte |
Benefits
Longer lifespan
Wear-resistant seals and hardened components
Unrestricted internal design allows for the free flow of materials
Divorced design separates fluid components from air components
Quality dispensing
No-drip feature creates immediate material shut off
Adjustable piston stroke allows for flow rate control
Exact consistency
Short stroke length produces immediate on/off control of materials being dispensed
Features
Uses disposable static mixers
Hardened and ground spools
Easy repeatable mounting for automation platforms
Machined face plate with locating holes for dowel pins
Unique design allows for easy maintenance
Multiple seal configurations are available
Available in all stainless steel or aluminum
Adaptable to disposable bayonet style static mixers
| Dry Weight | 1.4 kg (3 lbs) |
| Valve Height | 14.1 cm (5.55") |
| Valve Diameter | 5.56 cm (2.19") |
| Max Stroke Height | 7.11 cm (2.80") |
| Maximum inlet fluid pressure | 241 bar (3500 psi) |
| Minimum inlet air pressure | 4.2 bar (60 psi) |
| Operation | Double air operate; air to open, air to close (spring assisted) |
| Material delivery | All 2-component meter-mix dispense systems |
| Viscosity range | Liquid to light paste |
| Valve type | Standard 2 Port Nose |