0Inquiry

200L Nordson Pneumatic pump SD3

PN: 55-SD3

For Efficient Dispensing of High Viscosity Ambient Temperature Adhesives and Sealants.
Suitable for sealant, adhesive, acrylic, silicone, RTV, epoxy, urethane applications and more.

  • Air motors and multiple follower plates are interchangeable to allow simple system configuration
  • Unique plunger seal design to eliminate risk of costly material waste / loss due to leakage or pressure loss
  • Simple and intuitive pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.
Suitable pail sizes:
Straight 571mm
Available ratios
Ratio Material pressure range
10:1 400 – 750 psi / 27.5 – 51.5 bar
25:1 1000 – 2000 psi / 69 – 137.5 bar
40:1 1,600 – 3,200 psi / 110 – 220.5 bar
65:1 2,600 – 4,800 psi / 180 – 331 bar

 

Technical specifications

Volume per Cycle 190 cc / 6.42 fl oz.
Maximum Output 2.85 L/min. / 0.75 gal/min.
Maximum Cycle Rate Intermittent:1 cycle per 4 sec.

Continuous: 1 cycle per 8 sec.

Dynamic Viscosity Range 30,000 - 4,000,000cps
Wetted material Carbon steel
Dimensions
W / H / D 130 cm / 224 cm / 66 cm

 

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information