0Inquiry

20L Single Post Nordson Pneumatic Pump SD3

PN: 5S-SD3

For Efficient Dispensing of High Viscosity Ambient Temperature Adhesives and Sealants.
Suitable for sealant, adhesive, acrylic, silicone, RTV, epoxy, urethane applications and more.

  •  Air motors and multiple follower plates are interchangeable to allow simple system configuration
  • Unique plunger seal design to eliminate risk of costly material waste / loss due to leakage or pressure loss
  • Simple and intuitive pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.
Suitable pail sizes:
Straight 280, 286, 305, 310mm
Tapered 280 – 286mm
Max pail height 18″ (147mm)
Ratio Material pressure range
6:1 240 – 450 psi / 16.5 – 31 bar
10:1 400 – 750 psi / 27.5 – 51.5 bar
15:1 600 – 1100 psi / 41 – 75.5 bar
25:1 1000 – 2000 / 69 –137.5 bar

 

Technical specifications

Volume per Cycle 190 cc / 6.42 fl oz.
Maximum Output 2.85 L/min. / 0.75 gal/min.
Maximum Cycle Rate Intermittent:1 cycle per 4 sec.

Continuous: 1 cycle per 8 sec.

Dynamic Viscosity Range 30,000 - 4,000,000cps
Wetted material Carbon steel
Dimensions
W / H / D 58 cm / 201 cm / 48 cm

 

 

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information