1Inquiry

787MS-SS-RC RECIRCULATING MICROSPRAY VALVE

PN: 7026680

MICROSPRAY VALVE FOR PRECISE, UNIFORM SPRAY PATTERNS

This model is for applications with particle-filled fluids that must be kept in suspension, or fluids that must be kept circulating to prevent separation.

The 787MS-SS Series is a precision spray valve that uses low volume low pressure (LVLP) technology to produce uniform spray patterns between 3.3 mm and 19 mm (0.130 and 0.75″) in diameter.

Innovative design uses a small gauge 0.3 mm – 0.1 mm (0.013″ – 0.004″ ID) disposable dispensing tip in place of a standard spray nozzle. This concentrates the LVLP air used to atomize the coating into uniform spray patterns over 30% smaller than Nordson EFD’s standard spray valve configuration. Between shots the valve needle seats in the hub of the dispensing tip, virtually eliminating dead fluid volume.

Features
• High transfer efficiency
• No overspray or mist
• Medium- to low-viscosity fluids
• Consistent spray patterns
• Cycle rate exceeds 400/minute
• Low maintenance design

Add to inquiry

Specifications:
Size: 
131.6 mm length x 26.9 mm
diameter  (5.18" x 1.06")
Weight:  336 grams (11.8 oz)
Fluid body:  Type 303 stainless steel
Air cylinder body:  Type 303 stainless steel
Piston:  Type 303 stainless steel
Needle:  Type 303 stainless steel
Fluid inlet thread:  1/8 NPT female
Air cap:  Type 303 stainless steel
Free flow orifice:  33 ga (.004, 0.10mm) to 23 ga (.013, 0.33 mm)
Needle packagings:  PTFE
Mounting:  ¼-28 UNF tapped hole
Maximum fluid pressure:  100 psi
Maximum operating temperature:  102°C (215°F)

NordsonEFD_787MS-RC_drawing

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information