0Inquiry

781RC-SS SPRAY VALVE .014

PN: 7012744

781RC MicroMark® Recirculating Spray Marking System

The 781RC MicroMark Recirculating Spray Marking System produces uniform round patterns and stripes from 5.0mm to 30.4mm (0.20″ to 1.20″) wide without clogging or overspray.
This unique marking system eliminates the clogging, maintenance and downtime encountered with standard marking systems by using a recirculating pump to keep pigments in suspension and a programmable air delay after each cycle to clean the spray nozzle.
This MicroMark system can be used to color-code similar components, indicate pass/fail, or show production or test status. It can be activated manually, or interfaced with other systems to mark at scheduled intervals.

Features
• No clogging, dripping or drying out
• Keep pigments in suspension
• No missed shots
• Consistent size and placement
• Cycle rate exceeds 400/minute
• No mist or overspray
• Low-maintenance design

Add to inquiry

Specification:

Size: 104.6 mm length x 26.9 mm diameter (4.12" x 1.06")
Weight: 235.3 g (8.29 oz)
Actuating air pressure required: 4.8–6.2 bar (70–90 psi)
Maximum input fluid pressure: 7.0 bar (100 psi)
Fluid inlet thread: 1/8 NPT female
Mounting: (1) 1/4-28 UNF tapped hole or adjustable mounting block
Cycle rate: Exceeds 400 per minute
Air cylinder body: 303 stainless steel
Fluid body: 303 stainless steel
Air cap: 303 stainless steel
Piston: 303 stainless steel
Needle and Nozzle: 303 stainless steel
Needle packings: Teflon

SprayValveRC_drawing

NordsonEFD_Spray_area_coverage_781S-SS-28

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information