0Inquiry

CONTROLLER 8000, DISPENSE VALVE

PN: 7022004

The fastest, most precise way to adjust fluid deposits

Deposit size is determined by a combination of fluid pressure, valve stroke, tip size and valve open time, with valve open time providing the greatest control over the amount of fluid dispensed.
The Nordson EFD ValveMate™ 8000 controller is a fast, convenient way to adjust valve open time in increments as small as 0.001 seconds, right at the dispensing station. The result is exceptional process control without time-consuming programming or mechanical adjustments that require the production line to be shut down.

Benefits
• Maximum process control
• “On the fly” deposit adjustment
• Intuitive, easy operator interface
• Cost-effective – one ValveMate 8000 can control 1, 2, 3 or 4 valves
• Simple to set up and operate
• Easily interfaced with a PLC

Specifications

Cabinet size: 18.3W x 8.5H x 5.0D cm (7.22W x 3.38H x 2.0D")
Weight: 0.27 kg (0.6 lb)
Input AC (to power supply): 100–240 VAC, 50/60Hz
Output voltage (from power supply): 24 VDC, 1.25 Amp maximum
Power requirements: 24 VDC, 1.25 Amp maximum
Feedback circuits: 5 to 24 VDC NC solid-state switch 100 mA maximum
Initiate circuit: 5 to 24 VDC signal
Cycle rate: Exceeds 600 per minute
Time range: Programmable 0.001 to 99.9 seconds
Approvals: CE, RoHS, WEEE, and China ROHS

7022004_Nordson_EFD_Controller_ValveMate_8000_Drawing

This site uses cookies. By using this site, you agree to the storage and use of cookies. More information